Instant Review; Manual Tracking; Next Function Memory - JVC HR-DVS2EU Instructions Manual

Instant ReView

(VHS Deck Only)
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE INSTANT
REVIEW
1
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
The front display panel tells you how many
programmes have been timer-recorded. If you have,
for example, 3 programmes, "REVIEW" and "3"
appear and blink. To watch the first of the 3
programmes, press REVIEW three times. The recorder
searches and begins playback automatically. You can
access a programme as far as 9 index codes away
from the current tape position.
NOTE:
Instant ReView is not possible while the recorder is in the Timer
mode.

Next Function Memory

The Next Function Memory "tells" the recorder what to do
after rewinding. Before continuing, make sure the recorder
is in the Stop mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press
c– For Automatic Cassette Ejection After Tape Rewind . . .
. . . press REW, then press EJECT within 2 seconds.
NOTE:
The Automatic Power Off of the Next Function Memory
does not work if the Auto Timer is set to "ON". If the Auto
Timer is set to "ON", the recorder directly goes into the
Timer-Standby mode at the same time when the
button is pressed for the Automatic Power Off.
within 2 seconds.

Manual Tracking

(VHS Deck Only)
Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the PR buttons.
OVERRIDE AUTOMATIC
TRACKING
1
Press on the remote to engage manual tracking.
ADJUST TRACKING
MANUALLY
2
Press PR + or – to adjust tracking.
RETURN TO AUTOMATIC
TRACKING
3
Press on the remote to re-engage automatic
tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
21
EN