Subsidiary Settings; Showv - JVC HR-DVS2EU Instructions Manual

SUBSIDIARY SETTINGS

S V
HOW
IMPORTANT
Normally, Auto Set Up (
automatically. You need to set the Guide Program Numbers manually only in the following cases.
When timer-programming with the S
on your recorder, is not selected or when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has
taken place.
— Set the Guide Program Number for that station manually.
When you wish to timer-record a satellite programme with the S
— Set the Guide Program Numbers for all satellite broadcasts received on your satellite receiver.
Turn on the TV and select the AV mode.
Guide Program Number Set
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS INITIAL SET
SCREEN
2
Press % fi to move the highlight bar (pointer) to
"INITIAL SET", then press OK or
ACCESS GUIDE PROG SET
SCREEN
3
Press % fi to move the highlight bar (pointer) to "GUIDE
PROG SET", then press OK or
ENTER GUIDE PROG
NUMBER
4
Press % fi to enter the Guide
Program number for the
desired station as shown in
the TV listings. Then press
#
OK or .
System Setup
®
IEW
pg. 6), Preset Download (
V system, the channel position, where the station you wish to record is received
HOW IEW
#
.
#
.
GUIDE PROG SET
GUIDE PROG TV PROG
2
[ 5 ∞] =
[0] : SAT
[MENU] : EXIT
(Ex.) When inputting the
Guide Program
number 2 for ZDF.
pg. 8) or Auto Channel Set (
V system.
HOW IEW
ENTER RECEIVING
CHANNEL POSITION
NUMBER
5
Press the NUMBER key "0"
to select "TV PROG" or
"SAT". Then press % fi to
input the number of the
preset position on which
the Guide Program
number's broadcast is
received by the recorder or
the satellite receiver. Then
press OK or
To timer-record a
satellite programme with
the S
to install the provided Satellite Controller and
perform the procedure described in "Satellite
Receiver Control Setting" (
Repeat steps 4 and 5 as necessary.
RETURN TO NORMAL
SCREEN
6
Press MENU.
5
Guide Program Number
"Guide Program (GUIDE PROG) number" refers to the
assigned TV station numbers, according to broadcast area, for
the S V
HOW
can be found in most TV listings.
pg. 68) sets the Guide Program Numbers
GUIDE PROG
[5 ∞ ] =
[MENU] : EXIT
#
.
(Ex.) If ZDF is received on
V system, you need
HOW IEW
pg. 13).
timer recording. The Guide Program numbers
IEW
67
EN
GUIDE PROG SET
TV PROG
2 2
ZDF
[0] : SAT
channel position 2.