JVC HR-DVS2EU Instructions Manual page 53

A
TV Receiver
(AV mode)
21-pin SCART Cable
(not provided)
Recorder
C
TV Receiver
(AV mode)
S-Video Cable
(not provided)
21-pin SCART Cable
(not provided)
Player
NOTES:
All necessary cables can be obtained from your dealer.
For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.
When you select EDIT to dub tapes in step 4, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (
If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this
recorder's S-VIDEO and AUDIO input/output connectors.
When Using Your Video Recorder As The Source Player ...
... connect its rear panel S OUT and AUDIO output connectors to the recording deck's S-Video and Audio input connectors.
When Using Your Video Recorder As The Recording Deck ...
... connect its front panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors.
Then, set the recorder's input mode to "F-1" and set "VHS F-1 INPUT" to "S-VIDEO". (
Player Your recorder
21-pin SCART Cable
(provided)
Another recorder
Recorder
Your recorder
21-pin SCART Cable
(provided)
Another recorder
B
Recorder Your recorder
21-pin SCART Cable
(provided)
Another recorder
Player
pg. 59)
EN
TV Receiver
(AV mode)
21-pin SCART Cable
(not provided)
pg. 11).
53