Korg drumlogue Owner's Manual page 41

PARAMETERS
TIME
Adjusts the reverb time.
INPUT
Adjusts the signal level of the reverb input.
BRIGHT
Adjusts the tone (brightness) of the reverb.
RISE (Riser only)
Adjusts the pitch-shifted reverb sound signal on the octave.
DIVE (Submarine only)
Adjusts the pitch-shifted reverb sound signal below the octave.
MIX/ROUTE
LEVEL
Adjusts the amount of the reverb effect.
RETURN
Select whether to put the reverb effect before or after the master effect.
MASTER (Master Effect)
SOUND SELECT
SELECT
Select the type of master effect.
Compressor: A basic compressor that raises the sound pressure.
Filter: A multi-mode filter with cutoff resonance.
Boost: A booster with adjustable center frequency and saturation.
EQ Three: A 3-band equalizer with adjustable crossover frequency.
* You can also add master effects created with the logue SDK (→ p.52 "Loading
user synth and effects").
PARAMETERS - For Compressor
THRESH (THRESHOLD)
Adjusts the threshold at which the compressor begins to apply.
ATTACK
Adjusts the attack time that the compressor responds to.
[0.0%...100.0%]
[0.0%...100.0%]
[0.0%...100.0%]
[0.0%...100.0%]
[0.0%...100.0%]
[0.0%...100.0%]
[PRE, POST]
[---, Compressor, Filter, Boost, EQ Three, ...*]
[-64.0dB...0.0dB]
[0.5ms...100ms]
41