Korg drumlogue Owner's Manual page 31

DECAY (RS only)
Sets the decay time. The greater the value, the longer the sound.
START
Sets the start position of sample playback.
END
Sets the end position of sample playback.
CUTOFF
Sets the cutoff frequency of the filter.
You can select the low-pass filter, no filter (THRU), or the high-pass filter.
RESON (CUTOFF RESONANCE) [0.0%...100.0%]
Sets the cutoff resonance of the filter.
If you increase the value, the filter oscillates, which may cause the sound to
continue.
REDUX
Adjusts the distortion amount due to bit reduction.
DRIVE
Sets the distortion amount of the sound source. A fat sound is created by moder-
ately distorting the sound source.
MIX/ROUTE
PAN
Adjusts the pan pot (left and right stereo localization).
SPREAD
Adjusts the spread of sound (stereo feeling).
DELAY
Adjusts the feed amount of the delay effect.
REVERB
Adjusts the feed amount of the reverb effect.
MASTER
Sets the master effect to On or Bypass.
SIDECH (SIDECHAIN)
Adjusts the feed amount of the SIDECHAIN pass.
[0.0%...100.0%]
[0.0%...100.0%]
[0.0%...100.0%]
[L0.0%...L99.5%, THRU, H0.5%...H100.0%]
[0.0%...100.0%]
[0.0%...100.0%]
[L100%...L1%, C, R1%...R100%]
[<100%...<1%, 0, >1%...>100%]
[0.0%...100.0%]
[0.0%...100.0%]
[ON, BYPASS]
[0.0%...100.0%]
31