Korg drumlogue Owner's Manual page 32

SP1, SP2 (Sample sound sources 1, 2)
Control knob
SP1 (SP2) ATTACK
Adjusts the attack time of sample sound source 1 (or 2). The greater the value, the
slower the sound rises.
SP1 (SP2) DECAY
Adjusts the decay time of sample sound source 1 (or 2). The greater the value, the
longer the sound.
SP1 (SP2) TUNE
Adjusts the pitch of sample sound source 1 (or 2). The greater the value, the higher
the sound.
SOUND SELECT
BANK
(Same as CH/OH/RS/CP)
SAMPLE
(Same as CH/OH/RS/CP)
PARAMETERS
START
Sets the start position of sample playback.
END
Sets the end position of sample playback.
CUTOFF
Sets the cutoff frequency of the filter.
You can select the low-pass filter, no filter (THRU), or the high-pass filter.
RESON (CUTOFF RESONANCE) [0.0%...100.0%]
Sets the cutoff resonance of the filter.
If you increase the value, the filter oscillates, which may cause the sound to
continue.
REDUX
Adjusts the distortion amount due to bit reduction.
DRIVE
Sets the distortion amount of the sound source. A fat sound is created by moder-
ately distorting the sound source.
[0...1023]
[0...1023]
[-24.00...0.00...+24.00]
[CH, OH, RS, CP, MISC, USER, EXP]
[01..16/64/128]
[0.0%...100.0%]
[0.0%...100.0%]
[L0.0%...L99.5%, THRU, H0.5%...H100.0%]
[0.0%...100.0%]
[0.0%...100.0%]
32