Korg drumlogue Owner's Manual page 35

NOISE
SOUND SELECT
ALGO
Select the noise sound type. The low pass (LPF), band pass (BPF), and high pass
(HPF) provide two types of filters: -12dB/oct and -24dB/oct.
DECIM is the noise source that uses sampling rate decimation.
PARAMETERS
COLOR
Adjusts the darkness and brightness of the tone. The lower the parameter value,
the darker the tone.
PEAK (other than DECIM)
Adjusts the peak of the filter.
ATTACK
Sets the attack time. The higher the value, the slower the rises of the sound.
RELEASE
Sets the release time. The higher the value, the longer the sound.
MIX/ROUTE
PAN
Adjusts the pan pot (left and right stereo localization).
SPREAD
Adjusts the spread of sound (stereo feeling).
DELAY
Adjusts the feed amount of the delay effect.
REVERB
Adjusts the feed amount of the reverb effect.
MASTER
Sets the master effect to On or Bypass.
SIDECH (SIDECHAIN)
Adjusts the feed amount of the SIDECHAIN pass.
[LPF 2, LPF 4, BPF 2, BPF 4, HPF 2, HPF 4, DECIM]
[0.0%...100.0%]
[0.0%...100.0%]
[0.0%...100.0%]
[0.0%...100.0%]
[L100%...L1%, C, R1%...R100%]
[<100%...<1%, 0, >1%...>100%]
[0.0%...100.0%]
[0.0%...100.0%]
[ON, BYPASS]
[0.0%...100.0%]
35