Korg drumlogue Owner's Manual page 24

GROUP
Sets the group to apply the priority.
Each time you press buttons 1 to 13, the part switches between OFF and 1.
PRIORITY
Sets the priority of the part.
RAND.PART (KIT) (Button 3)
Sets the parameters of the current part (various parameters and SOUND SELECT
on the PARAMETERS page) with random values. If you press the button several
times, the parameter is set with a different random value each time.
CLEAR PART (KIT) (Button 4)
Resets the tone of the current part. Press the button again to undo the operation
(restores the parameter state that existed before resetting).
If you switch the target part before executing undo, you cannot undo.
CLEAR ALL (KIT) (Button 5)
Resets the tone of all parts. Press the button again to undo the operation (restores
the parameter state that existed before resetting).
ON/OFF (Button 6)
Sets the motion sequence on or off.
CLEAR STEP (Button 7)
Resets the motion of the current part for each step. Press the button again after re-
setting to undo the operation (restores the parameter state that existed before reset-
ting).
CLEAR PART (MOTION) (Button 8)
Resets all motions for the current part. Press the button again after resetting to
undo the operation (restores the parameter state that existed before resetting).
If you switch the target part before executing undo, you cannot undo.
CLEAR ALL (MOTION) (Button 9)
Resets the motion set for all parts. Press the button again after resetting to undo the
operation (restores the parameter state that existed before resetting).
[OFF, 1...4]
[LOW, MID, HIGH]
24