Korg drumlogue Owner's Manual page 40

TRACKING
Adjusts the amount that simulates the tracking sensitivity of the tape head.
TONE
Adjusts the sound quality of the delay effect.
SAT. (SATURATION)
Sets the saturation level of the filter.
ROUTE
Sets the feedback signal route.
NORMAL
MIX/ROUTE
LEVEL
Adjusts the amount of the delay effect.
RETURN
Select whether to put the reverb effect before or after the master effect.
REVERB
Adjusts the amount to feed from the delay to the reverb.
REVERB
SOUND SELECT
SELECT
Select the type of reverb effect.
Room: A reverb inspired by the reverberating sound created in a small room.
Hall: A reverb inspired by the reverberating sound created in a concert hall or en-
semble hall.
Space: An unstable reverb with a slow reverberating sound.
Riser: A glittering reverb with a reverberating sound that spreads an octave above.
Submarine: A deep reverb with a reverberating sound that extends an octave below.
* You can also add reverb effects created with the logue SDK (→ p.52 "Loading
user synth and effects").
[0.0%...100.0%]
[0.0%...100.0%]
[0.0%...100.0%]
[NORMAL, CROSSED, P-PONG]
FB
L
R
FB
CROSSED
[0.0%...100.0%]
[PRE, POST]
[0.0%...100.0%]
[---, Room, Hall, Space, Riser, Submarine, ...*]
L
FB
FB
R
40
L
FB
R
P-PONG