Korg drumlogue Owner's Manual page 39

You can select the low-pass filter or the high-pass filter.
CUTOFF
Sets the cutoff frequency of the filter.
SAT. (SATURATION)
Sets the saturation level of the filter.
ROUTE
Sets the feedback signal route.
NORMAL
PARAMETERS - For Mono/Mono BPM
TIME
Adjusts the delay time.
* For Mono BPM, set TIME as the relative value for the BPM value of the tempo.
FB (FEEDBACK)
Adjusts the delay feedback amount.
FILTER
Select the filter type for feedback.
You can select the low-pass filter or the high-pass filter.
CUTOFF
Sets the cutoff frequency of the filter.
SAT. (SATURATION)
Sets the saturation level of the filter.
PARAMETERS - For Tape/Tape BPM
TIME
Adjusts the delay time.
* For Tape BPM, set TIME as the relative value for the BPM value of the tempo.
FB (FEEDBACK)
Adjusts the delay feedback amount.
MOD (MODULATION)
Adjusts the amount of the modulation applied to the delay time period.
[0.0%...100.0%]
[0.0%...100.0%]
[NORMAL, CROSSED, P-PONG]
FB
L
R
FB
CROSSED
[0.0%...100.0%]/[1/64, 1/48, ... 3/4, 1]
[0.0%...100.0%]
[---, LP, HP]
[0.0%...100.0%]
[0.0%...100.0%]
[0.0%...100.0%]/[1/64, 1/48, ... 3/4, 1]
[0.0%...100.0%]
[0%...100%]
L
FB
FB
R
39
L
FB
R
P-PONG