Batch Takeup; Self-Strip Printing; Parallel Interface Pin Descriptions - Intermec EasyCoder 3400 User Manual

Appendix A— Specifications

Parallel Interface Pin Descriptions

80

Batch Takeup

This device automatically spools labels as they are printed. This
attachment is limited to small batches with maximum outer diameter
(OD) of 12.7 centimeters (5 inches).

Self-Strip Printing

Use self-strip printing in applications where you want to apply labels to a
surface immediately. After printing a label, the printer prints out the label with
the backing removed. This option must be ordered when you order your
printer.
The following pin descriptions are for the printer's parallel interface
connector:
Parallel Interface Pin Descriptions
Signal Pin Return
DATASTB 1 19
DB0 2 20
DB1 3 21
DB2 4 22
DB3 5 23
DB4 6 24
DB5 7 25
DB6 8 26
DB7 9 27
ACK 10 28
BUSY 11 29
PE 12 30
SELECT 13 -
CHASSIS 17 -
GND
INIT 31 16
FAULT 32 33
3400, 3440, and 3600 Bar Code Label Printer User's Manual
Direction Description
IN Negative pulse. Latches DB0-7 on
the rising edge. Eight bits in parallel
provide data input. High is logical 1
and LOW is logical 0.
IN
IN
IN
IN
IN
IN
IN
IN
OUT Negative pulse. Data has been
received.
OUT If HIGH, printer cannot receive
data.
OUT If HIGH, out of ribbon or media.
OUT Pulled to +5V. Printer is on.
- Printer's chassis gnd isolated from
logic gnd.
IN Clears I/OINT0 latch.
OUT See printer display.