gered so many times that the false alarm prevention circuitry has
bypassed that zone. In either case, the status LED and transceiver
LCD will indicate which zone was triggered (see Table of Zones
section). The security system will retain this information in its
memory and chirp four or five times each time it is disarmed,
until the next time that the ignition is turned on.
system status chirps
The siren will chirp when arming/disarming the system. The
pattern of chirps will audibly report the system's status as
described below.
Action
Number of Chirps/
Remote Beeps
Arm
1
Arm
1 (3-second delay), 1
Disarm
2
Disarm
4
Disarm
5
Description
System armed
System armed with
open zone notification
System disarmed
System disarmed with
previous alarm
System disarmed false
alarm prevention
circuitry active
37