Over And Under Rev Protection; Shut Down Inputs; False Alarm Prevention Circuitry - Clarion UNGO ProSecurity SR5000 Owner's Manual

over and under rev protection

The system monitors the engine speed and will automatically
shut the engine off if the RPMs rise above or fall below the
programmed levels. This feature prevents damage to the motor
due to fuel delivery system failures or other problems which may
cause the engine to race.
note: The system uses a wire connected to the vehicle to
sense engine speed. This wire must be connected in order
for over and under rev protection to work.

shut down inputs

This security system uses several inputs to shut down the remote
start operation of the motor or prevent remote start if certain
inputs are active. The two most important are hood and brake
inputs. The hood input will prevent the motor from starting, as
well as shut it down, any time the hood is opened. The brake
pedal will shut down the motor at any time during remote start
operation, as well as preventing the remote start from activating
while it is being pressed.

false alarm prevention circuitry

Your system has false alarm prevention circuitry. It prevents
annoying repetitive trigger sequences due to faulty door pin
switches or environmental conditions such as thunder, jackham-
mers, airport noise, etc.
34