Set Mode; I Set Mode Description - Icom IC-756PROII Instruction Manual

9

SET MODE

I Set mode description

Set mode is used for programming infrequently
changed values or conditions of functions. This trans-
ceiver has a level set mode, display set mode, timer
set mode and miscellaneous (others) set mode.
• Set mode operation
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [EXIT/SET] for 1 sec. to select the set mode
menu screen.
e Push [(F-1)LEVEL], [(F-2)DISP], [(F-3)DSP], [(F-
4)TIME] or [(F-5)OTHERS] to enter the desired set
mode.
r For display or miscellaneous (others) set mode,
push [(F-5)WIDE] to toggle wide and normal
screen.
• Start up screen
qr.qot.pp
qr.wpt.pp
• Set mode menu screen
qr.qot.pp
qr.wpt.pp
F-1
• Level set mode (p. 65)
64
qw pp
Push
EXIT/SET
for 1 sec.
qw pp
t Push [(F-1)Y] or [(F-2)Z] to select the desired item.
y Set the desired condition using the tuning dial.
• Push [(F-3)DEF] for 1 sec. to select a default condition
or value.
u For timer set mode, push [(F-4)SET] to enter the set
time.
i Push [EXIT/SET] twice to exit the set mode.
• Display set mode (p. 66)
F-2
• DSP set mode (p. 67)
F-3
• Timer set mode (pgs. 62, 68)
F-4
• Miscellaneous (others) set mode (p. 68)
F5