I Level Set Mode - Icom IC-756PROII Instruction Manual

I Level set mode

This item adjusts the bass level of the transmit audio
tone in SSB mode from –5 dB to +5 dB in 1 dB steps.
This item adjusts the treble level of the transmit audio
tone in SSB mode from –5 dB to +5 dB in 1 dB steps.
This item adjusts the transmit IF signal monitor level
from 0% to 100% in 1% steps.
See p. 35 for details.
This item adjusts the CW side tone level from 0% to
100% in 1% steps.
See p. 35 for details.
This item allows you to set a maximum volume level
for CW side tones. CW side tones are linked to the
[AF] control until a specified volume level is reached
— further rotation of the [AF] control will not increase
the volume of the CW side tones.
This item adjusts the volume level for confirmation
beep tones from 0% to 100% in 1% steps. When
beep tones are turned OFF, this setting has no effect.
This item allows you to set a maximum volume level
for confirmation beep tones. Confirmation beep tones
are linked to the [AF] control until a specified volume
level is reached — further rotation of the [AF] control
will not increase the volume of the beep tones.
0 dB (default)
0 dB (default)
50% (default)
50% (default)
CW side tone level is limited
with [AF] (default)
50% (default)
Beep level is limited with
[AF] (default)
9
SET MODE
CW side tone level is linked
to [AF]
linked
Beep level is to [AF]
65