I Memory Channel Programming - Icom IC-756PROII Instruction Manual

I Memory channel programming

Memory channel programming can be preformed ei-
ther in VFO mode or in memory mode.
• Programming in VFO mode
q Set the desired frequency and operating mode in
VFO mode.
w Push [Y]/[Z] several times to select the desired
memory channel.
• Memory channel screen is convenient for selecting the
desired channel.
• Memory channel contents appear in the memory chan-
nel readout (below the frequency readout).
• "--.---.--" appears if the selected memory channel is a
blank channel (and does not have contents).
e Push [MW] for 1 sec. to program the displayed fre-
quency and operating mode into the memory
channel.
• Programming in memory mode
q Select the desired memory channel with [Y]/[Z] in
memory mode.
• Memory channel contents appear in the memory chan-
nel readout (below the frequency readout).
• "--.---.--" appears if the selected memory channel is a
blank channel (and does not have contents).
w Set the desired frequency and operating mode in
memory mode.
• To program a blank channel, use direct frequency entry
with the keypad or memo pads, etc.
e Push [MW] for 1 sec. to program the displayed fre-
quency and operating mode into the memory
channel.
MEMORY OPERATION
[EXAMPLE]: Programming 7.088 MHz/LSB into
memory channel 12.
qr.qpp.pp
3
7
u.pii.pp
or
u.pii.pp
MW Beep
u.pii.pp
[EXAMPLE]: Programming 21.280 MHz/USB into
memory channel 18.
u.pii.pp
or
e.tpw.pp
7
21
wq.wip.pp
MW Beep
wq.wip.pp
qw pp
SSB
qw pp
qw pp
Beep
Push for 1 sec.
Beep
qw pp
qw pp
qw pp
SSB
qw pp
Beep
Push for 1 sec.
Beep
qw pp
6
53