Memory Operation; I Memory Channels; I Memory Channel Selection - Icom IC-756PROII Instruction Manual

I Memory channels

The transceiver has 101 memory channels. The mem-
ory mode is very useful for quickly changing to often-
used frequencies.
MEMORY
MEMORY
CHANNEL
CHANNEL
NUMBER
Regular memory
channels
Scan edge
memory
channels

I Memory channel selection

• Using the [Y Y ] or [Z Z ] keys
q Push [VFO/MEMO] to select memory mode.
w Push [Y]/[Z] several times to select the desired
memory channel.
• Push and hold [Y]/[Z] for continuous selection.
• [UP] and [DN] on the microphone can also be used.
e To return to VFO mode, push [VFO/MEMO] again.
qr.qot.pp
VFO/
MEMO
qr.qpp.pp
or
wr.oyp.pp
CAPABILITY
One frequency and one mode
1–99
in each memory channel.
One frequency and one mode in
P1, P2 each memory channel as scan
edges for programmed scan.
qw pp
qw pp
qw pp

MEMORY OPERATION

All 101 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the tuning dial, etc. in memory mode.
TRANSFER
TO VFO
Yes
Yes
• Using the keypad
q Push [VFO/MEMO] to select memory mode.
w Push [F-INP].
e Push the desired memory channel number using
the keypad.
• Enter 100 or 101 to select scan edge channel P1 or P2,
respectively.
r Push [Y] or [Z] to select the desired memory
channel.
qr.qpp.pp
then
F-INP
ENT
.qpp.qw
or
wr.oyp.pp
6
OVER-
CLEAR
WRITING
Yes Yes
Yes No
qw pp
1 2
qw pp
51