Service; Replacing Fan Motors And Blades - Hussmann IMPACT Elite ES1 Installation And Operation Manual

P/N 0453549

REPLACING FAN MOTORS AND BLADES

See cross section for location of evaporator fans.
Should it ever be necessary to service or replace
the fan motors or blades be certain that the fan
blades are re-installed correctly. T
MUST BE INSTALLED WITH RAISED EMBOSSING
(
PART NUMBER ON PLASTIC BLADES
AS INDICATED ON THE PARTS LIST
case data sheet for each model.)
For access to evaporator fans:
1. Turn off power
2. Remove bottom display pans.
3. Disconnect fan from wiring harness.
4. Lift fan plenum out of case. Place on stable
work surface.
5. Remove screws holding fan basket to
plenum. Fan blade may be removed after fan
assembly is removed from plenum.
6. Remove screws holding bottom of motor to
fan basket.
7. Replace fan motor and blade in fan basket.
8. Reinstall fan basket in plenum and reinstall
plenum in case.
9. Reconnect fan to wiring harness. Turn power
on.
10. Verify that motor is working and blade is
turning in the correct direction.
Hussmann Corporation • Bridgeton, MO 63044-2483 U.S.A.

SERVICE

HE BLADES
)
POSITIONED
. (Refer to the
WARNING
!
Always disconnect the electrical power at
the main disconnect when servicing or
replacing any electrical component. This
includes, but is not limited to,
such items as fans, heaters,
thermostats and lights.
3
4
5
Elite Service Merchandisers
6-1