Step 1 - Cisco Network Analysis Module 6000 Installation And Configuration Manual

Administering the NAM
Upgrading the NAM Application Software
To upgrade the NAM application software, follow these steps:
Copy the NAM application software image to a directory accessible to FTP.

Step 1

Log into the switch through the console port or through a Telnet session.
Step 2
To upgrade the application software, the NAM must be running in the maintenance image. If the NAM
Step 3
is already running in the maintenance image, go to
mode:
Console> (enable) reset mod hdd:2
Step 4 After the NAM is back online, establish a console session with the NAM and log into the root account.
Upgrade the NAM application software by entering this command:
Step 5
root@localhost# upgrade ftp-url
ftp-url is the FTP location and the name of the NAM software image file.
Note
Follow the screen prompts during the upgrade.
Step 6
After completing the upgrade, log out of the NAM.
Step 7
Reset the NAM by entering this command:
Step 8
Console> (enable) reset mod
(Optional) Verify the initial configuration after the NAM comes back online by logging into the NAM
Step 9
root account and entering the following commands:
root@localhost# show ip
root@localhost# show snmp
This example shows how to upgrade the NAM application software:
Console> (enable) reset 3 hdd:2
This command will reset module 3.
Unsaved configuration on module 3 will be lost
Do you want to continue (y/n) [n]? y
Module 3 shut down in progress, please don't remove module until shutdown completed.
Console> (enable) 2001 Apr 19 14:33:31 %SYS-5-MOD_RESET:Module 3 reset from Software
2001 Apr 19 14:35:27 %SYS-5-MOD_OK:Module 3 is online
Console> (enable) session 3
Trying NAM-3...
Connected to NAM-3.
Escape character is '^]'.
Cisco Network Analysis Module (WS-X6380-NAM)
Maintenance Partition
login: root
Password:
Catalyst 6000 Family Network Analysis Module Installation and Configuration Note
50
If the FTP server does not allow anonymous users, use the following syntax for the ftp-url
value: ftp://user@host/absolute-path/filename. Enter your password when prompted.
Step 4. Otherwise, enter this command in privileged
78-10406-05