Front Panel Description - Cisco Network Analysis Module 6000 Installation And Configuration Manual

Overview
•
•
•
•
•
Note
•

Front Panel Description

The NAM front panel (see
and PCMCIA slot.
Figure 1
WS-X6380-NAM
NTWK ANALYSIS HDL
STATUS LED
STATUS LED
The STATUS LED indicates the operating states of the NAM.
Table 1
Color
Green
Red
Catalyst 6000 Family Network Analysis Module Installation and Configuration Note
4
The licensed Application Response Time (ART) MIB, which is used to determine the source of the
slowdowns in application performance. The ART MIB measures the response time on the network
at the transport layer.
Note You must purchase an ART MIB license from Cisco Systems before enabling and using
the ART MIB feature.
The licensed voice-monitoring application.
Note You must purchase a separate software license to enable voice collection on the NAM.
Both Media Gateway Control Protocol (MGCP) and Session Initiation Protocol (SIP) voice
protocols are now supported.
Signalling Connection Control Part (SCCP) and H.323 voice protocols are now supported.
The trap destination table is available when you enter the show snmp CLI command.
Cisco IOS does not support the show snmp CLI command.
You can upgrade the maintenance image while the application is running.
Figure
Network Analysis Module
For Vendor Use Only
SHUTDOWN
SHUTDOWN button Hard drive
STATUS LED Description
Description
All diagnostic tests pass. The NAM is operational.
A diagnostic other than an individual port test failed.
1) includes a STATUS LED, hard drive LED, SHUTDOWN button,
SLOT
1
0
PCMCIA
HD
PCMCIA slot
(HD) LED
EJECT
Table 1 describes the LED operation.
78-10406-05