Cisco Network Analysis Module 6000 Installation And Configuration Manual page 45

Administering the NAM
This example shows how to upgrade the NAM maintenance software:
Router#
Router#hw-mod module 9 reset hdd:1
Device BOOT variable for reset = hdd:1
Warning:Device list is not verified.
Proceed with reload of module? [confirm]
% reset issued for module 9
Router#
00:31:11:%SNMP-5-MODULETRAP:Module 9 [Down] Trap
00:31:11:SP:The PC in slot 9 is shutting down. Please wait ...
00:31:25:SP:PC shutdown completed for module 9
00:31:25:%C6KPWR-SP-4-DISABLED:power to module in slot 9 set off (admin
request)
00:31:28:SP:Resetting module 9 ...
00:31:28:%C6KPWR-SP-4-ENABLED:power to module in slot 9 set on
00:33:26:%SNMP-5-MODULETRAP:Module 9 [Up] Trap
00:33:26:%DIAG-SP-6-BYPASS:Module 9:Online Diagnostics is Bypassed
00:33:26:%OIR-SP-6-INSCARD:Card inserted in slot 9, interfaces are now
online
Router#
Router#session slot 9 proc 1
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 127.0.0.91 ... Open
Cisco Network Analysis Module (WS-X6380-NAM)
login:root
Password:
Network Analysis Module (WS-X6380-NAM) Console, 2.1(1)
Copyright (c) 1999, 2000, 2001 by cisco Systems, Inc.
root@hostname.cisco.com#
< upgrade ftp://hostname:/pub/rmon/c6nam-maint.1-2-1a-m.bin.gz
ftp://hostname:/pub/rmon/c6nam-maint.1-2-1a-m.bin.gz (119506K)
- [########################] 119506K | 611.83K/s
122374624 bytes transferred in 195.33 sec (611.82k/sec)
downloaded image version 1.2(1a)m
Upgrade file ftp://hostname:/pub/rmon/c6nam-maint.1-2-1a-m.bin.gz
is downloaded. Upgrading will wipe out the
contents of the maintenance partition on the hard disk.
Do you want to proceed installing it [y|N]:y
Proceeding with installation. Please do not interrupt.
If installation is interrupted or fails, boot this
partition again and restart upgrade.
Upgrade complete. You can boot the new maintenance partition.
root@hostname.cisco.com# exit
Router#
Router#hw-mod module 9 reset hdd:2
Device BOOT variable for reset = hdd:2
Warning:Device list is not verified.
Proceed with reload of module? [confirm]
% reset issued for module 9
Router#
02:27:19:%SNMP-5-MODULETRAP:Module 9 [Down] Trap
Catalyst 6000 Family Network Analysis Module Installation and Configuration Note
45
78-10406-05