Configuring CTMS Administration Software
Revised: June 6, 2008, OL-12586-02
Last Revised: August 4, 2008
Contents
•
•
•
•
•
•
•
Overview
The following sections describe the System Configuration parameters for the Cisco TelePresence
Multipoint Switch (CTMS). System Configuration is divided into the following areas:
•
•
•
•
OL-12586-02
Overview, page 4-21
System Settings, page 4-22
Editing IP Settings, page 4-22
–
Editing Access Settings, page 4-23
–
–
Configuring and Editing QoS Settings, page 4-24
–
Configuring and Editing Resource Management, page 4-28
Cisco Unified Communications Manager Settings, page 4-32
Configuring and Editing Unified CM Settings, page 4-33
–
Configuring and Editing SIP Profile Settings, page 4-33
–
Configuring and Editing Cisco TelePresence Manager Settings, page 4-35
Configuring and Editing Access Management, page 4-36
Upgrading Software Version, page 4-40
Interface Failover, page 4-41
System Settings, page 4-22
Cisco Unified Communications Manager Settings, page 4-32
Configuring and Editing Cisco TelePresence Manager Settings, page 4-35
Configuring and Editing Access Management, page 4-36
C H A P T E R
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
4
4-21