Cisco MCS 7800 Series Administration Manual page 75

Chapter 7 Monitoring CTMS System Processes
Figure 7-5
The initial Room Testing screen displays a table providing the following information, listing all currently
Step 2
active meetings by ID numbers:
Table 7-3
Field
Meeting ID
Description
Type
Rooms
Duration
Segments
To use the filter at the top of the table to find a particular meeting, enter either the Meeting ID number
Step 3
or the Room number in the appropriate field and then press "Filter."
To display a defined number of table rows, click the down arrow next to "Rows per page." Click to
Step 4
highlight and select predetermined amounts. If there are multiple pages, click the First, Previous, Next,
or Last button to navigate to the desired page.
Click "Refresh" to refresh the active meetings displayed.
Step 5
Click the radio button to the left of a table entry to select a particular meeting. Click "Details" to display
Step 6
the Room Testing screen for the rooms in that meeting.
Click "Loopback" to display the transmitted camera image (image is looped-back so that attendees
a.
see themselves) in each of the rooms for the selected meeting.
OL-12586-02
Room Testing Screen
Room Testing Table Field Descriptions
Description
ID number uniquely identifying an active meeting.
Text describing the active meeting.
Displays the defined meeting type. Meeting types are static and
ad hoc.
Lists the CTS end points (meeting rooms) attending this meeting.
Length of time this meeting has been active, listed in hours, minutes
and seconds.
Total number of segments for all rooms attending this meeting.
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
Room Testing
7-73