Configuring The Severity Level Of System Error Messages - Cisco MCS 7800 Series Administration Manual

Configuring the Severity Level of System Error Messages

•
•
•
•
Configuring the Severity Level of System Error Messages
To configure the severity level of system level error messages and alarms for specific process areas:
Click Log Files under the Troubleshooting folder in the Navigation Pane to open the Log Files window.
Step 1
Figure 6-3
Figure 6-3
At the top of the Log Files screen, there is a table listing the following CTMS system processes:
Step 2
•
•
•
•
•
To the left of each process is a drop-down list, listing the following severity levels:
•
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
6-62
To display a defined number of table rows, click the down arrow next to Rows Per Page. Click to
highlight and select predetermined amounts.
If there are multiple pages listing log files, click the First, <Previous, Next>, or Last button to
navigate to the desired page.
To delete one of the error messages, click the radio button to the left of the table entry, and then click
Clear.
To delete all error messages displayed, click Clear All.
shows the Log File Screen.
Log Files Screen
CCS
Conference Manager
Execution Manager
Media Processor
Switching
OFF
Chapter 6 Troubleshooting the CTMS System
OL-12586-02