Configuring and Editing Access Management
•
To edit one of the defined administrators, click the radio button to the left of the table entry, and then
click Edit.
•
To define a new administrator, click New,
When you click New from the Access Management screen, CTMS Administration software takes you to
Step 3
the New User Settings table as shown in
Figure 4-12
Enter settings as described in
Step 4
Table 4-10
Field or Button
Username
Password
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
4-38
Figure
New User Settings
Table 4-10
New User Settings
Setting
Username identifying a defined role as selected from the Role field.
Usernames must be at least 5 characters, but not more than
Note
64 characters in length, and can contain upper and lower case
alphanumeric characters and the underscore and dash
characters. The following usernames are not allowed:
apache, daemon, nobody, operator, and shutdown.
Password for the username indicated in the Username field.
Passwords must be at least 5 characters, but not more than 64
Note
characters in length, and can contain upper and lower case
alphanumeric characters and the underscore and dash
characters. The following usernames are not allowed:
apache, daemon, nobody, operator, and shutdown.
Chapter 4
Configuring CTMS Administration Software
4-12.
OL-12586-02