System Settings
Figure 4-2
To edit Access settings:
Step 1
Click System Settings under the System Configuration folder in the Navigation Pane.
Step 2
Click the Access Settings tab. Access Settings displays a table providing the Access Settings
configuration fields. All of the settings on the Access Screen are derived from settings you configured
in Cisco Unified Communications Manager (Unified CM).
Edit settings (as needed) as described in
Table 4-2
Field or Button
Route Pattern Start
Route Pattern End
Access Number
Access Name
•
•
Configuring and Editing QoS Settings
Figure 4-3
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
4-24
Access Settings
Access Settings
Setting
Defines the first number in your defined route pattern as configured
in Unified CM.
Defines the last number in your defined route pattern as configured
in Unified CM.
Displays the first number in the route pattern as defined in
Unified CM. CTMS Administration software (CTMSA)
automatically selects that number as the access number. That number
is used for scheduled meetings and cannot be used for static
meetings.
Descriptive name for the access number. Maximum number of
characters is 20.
To register new or modified settings, click Apply.
To restore the original settings, click Reset.
shows the QoS Settings screen.
Chapter 4
Table 4-2
Configuring CTMS Administration Software
OL-12586-02