Figure 5.3
Installing the ServeRAID-MR10M SAS/SATA Controller
Bracket Screw
Press Here
85021-06
Edge of
Motherboard
8. Attach the controller to the computer chassis with the bracket screw.
9. Attach the cables, as needed, to the connectors on the controller.
10. Reinstall the computer cover, reattach the power cords, and turn on
the power to the computer.
Attention:
See the ServeRAID-MR Software User's Guide for
information about running the RAID configuration utility and
installing software drivers.
Installing the iBBU on the ServeRAID-MR10M Controller
iBBU (Top View)
Press Here
Edge of Motherboard
5-5