Table of Contents
Advertisement
3.1
ServeRAID-MR10M SAS/SATA Controller
3.1.1
Board Layout and Connector Information
Chapter 3
ServeRAID-MR10M
SAS/SATA Controller
Characteristics
This chapter describes the characteristics of the ServeRAID-MR10M
SAS/SATA Controller. It consists of the following sections:
•
Section 3.1, "ServeRAID-MR10M SAS/SATA Controller"
•
Section 3.2, "ServeRAID-MR10M SAS/SATA Controller
Characteristics"
•
Section 3.3, "Technical Specifications"
The ServeRAID-MR10M SAS/SATA Controller is a dual PHY, SAS
PCI Express adapter and is used in a system with a PCI Express slot.
PCI Express goes beyond the PCI specification in that it is intended as
a unifying I/O architecture for various systems: desktops, workstations,
mobile, server, communications, and embedded devices.
The ServeRAID-MR10M controller has one LSISAS1078 ROC (RAID-on-
chip) processor that controls eight external SAS/SATA ports through two
x4 SAS external connectors.
This subsection provides the board layout and connector information for
the ServeRAID-MR10M controller. The following subsections provide
graphics and connector information for the controller.
The ServeRAID-MR10M controller has eight external SAS/SATA
connectors.
Figure 3.1
Table 3.1
describes them.
ServeRAID-MR10M User's Guide
displays the connectors on the controller, while
3-1
Advertisement
Table of Contents
