IBM System/360 20 Operating Procedure

File Number S360(Mod.20)-20
Form C24-9009-3
Systems Reference Library
IBM System/360 Model 20
Tape Programming System
Operating Procediures
Program Numbers:
360U-UT-131-135 Utility Programs·
360 U-SL -142-147 Service Programs
and 155-156
360U-CL -157-159
360 U-RG -148
360U~AS-149
360 U":SM-150
360 U-IO -151
360 U-IO -152
360 U-CO -154
Control Programs
Report Program Generator
Assembler Program
Sort/Merge Program
Input/Output and Basic Monitor
Macro Definitions
In'put/Output Macro Definitions
for the IBM 1419 and 1259
Input/Output Macro Definitiq·ns
fo;r the Binary Synchronous
Communications Adapter
This publication provides Model 20 operators with
the information required to operate their systems
using the Model 20 Tape Programming System (TPS).
Detailed information is given on (1) building
a tape-resident system from IBM-supplied programs,
(2) maintaining this system by means of IBM-sup-
plied programs, (3) executing IBM-supplied and
user-written programs under control of the· tape-
resident and card-resident systems of the TPS.
To derive the maximum benefit from this publi-
cation, the reader must be thoroughly familiar
with the functions and operation of all components
of his System/360 Model 20. The publications de-
scribing these components are listed in the SRL
publication IBM System/360 Model 20, Bibliography,
Form A26-3565.
TPS