Table of Contents
Advertisement
2.1
Requirements
Chapter 2
ServeRAID-MR10M
SAS/SATA Controller
Hardware Installation
This chapter describes the procedures used to install the ServeRAID-
MR10M SAS/SATA Controller. It consists of the following sections:
•
Section 2.1, "Requirements"
•
Section 2.2, "Quick Installation"
•
Section 2.3, "Detailed Installation"
•
Section 2.4, "SAS Device Cables"
•
Section 2.5, "After Installing the Controller"
•
Section 2.6, "Replacing a Failed Controller Containing Data in the
iBBU"
The following items are required for installation:
•
A ServeRAID-MR10M SAS/SATA Controller
•
A host system with an available PCI Express expansion slot
•
The ServeRAID-MR Support CD, containing the drivers and the
documentation
•
The necessary internal cables and/or external cables
•
SAS physical disks or SATA II physical disks (Mechanical or Solid
State Devices, SSDs)
Note:
For optimal performance, use an uninterruptible power
supply.
ServeRAID-MR10M User's Guide
2-1
Advertisement
Table of Contents
