Intelligent Battery Backup Unit - IBM ServeRAID-MR10M User Manual

5.1 Installing the iBBU
5-2
on the ServeRAID-MR10M Controller
The iBBU is compatible with systems that offer auxiliary power. Battery
charging and recharging take place automatically. The iBBU mounts
directly to the ServeRAID-MR10M controller using a small board-to-
board connector (daughtercard).
Figure 5.1 displays the top view and the bottom view of the card. (The
"top" side is the side you can see after you install the iBBU on the RAID
controller.) Note that this unit combines a battery pack with a
daughtercard.
Figure 5.1

Intelligent Battery Backup Unit

3
2
4
1 - J4 battery pack harness connector
2 - J5 board-to-board connector
3 - J2 connector
Installing the Intelligent Battery Backup Unit
iBBU (bottom view)
J2
J5
iBBU (top view)
J4
1
85021-07