3. Automatic Set Temperature
For each operation, set temperature will automatically set as shown below.
However it can be selected 2°C higher or 2°C lower from standard set temperature by pressing
the Room Temperature Setting button.
The mode judging temperature and standard setting temperature can be increased by
2°C, by open the circuit of JX1 at indoor electronic controller.
TOP PREVIOUS NEXT
Operation
Hi
(Standard)
(+2°C)
(±0°C)
Cooling
27°C
25°C
Soft Dry
24°C
22°C
Heating
23°C
21°C
Lo
(-2°C)
23°C
20°C
19°C