Panasonic CS-A18CKPG Service Manual page 103

6. Remove the Bearing. (
7. Remove the screws at the left of the Evaporator. (
8. Push up the Evaporator and pull out the Cross Flow Fan from shaft. By then, Fan Motor can be
taken out. ( Fig. 10
REMINDER - To reinstall the Fan Motor, put it back in place, adjust the position of the Fan
Motors leadwire appropriately as shown in the
Fig. 9 )
).
Fig. 7
Fig. 8
Fig. 9 )
Fig. 8 0before installing the Cross Flow Fan.