Tools and Equipment
Tools and Equipment
Safety and Compliance
Cisco XR 12404 Router Installation Guide
2-2
The Cisco XR 12404 Router is designed to be installed with a minimum number
of tools. The following tools are required.
1/4-inch flat-blade screwdriver
•
3/16-inch flat-blade screwdriver
•
9/16-inch wrench
•
•
10-mm wrench (either open-end or socket)
2-mm allen wrench
•
ESD-preventive wrist or ankle strap
•
Antistatic mat
•
Tape measure
•
Wire cutters
•
Pliers
•
The following guidelines will help to ensure your safety and protect the
equipment. This list is not inclusive of all potentially hazardous situations, so be
alert.
General Safety Guidelines, page 2-3
•
Preventing Electrostatic Discharge Damage, page 2-4
•
Laser Safety, page 2-6
•
Laser Safety, page 2-6
•
Lifting Guidelines, page 2-6
•
Chapter 2
Preparing for Installation
OL-13830-02