Cisco XR 12404 Installation Manual page 84

Installing a Flash Memory Card
Figure 3-13 PRP-3 External CompactFlash
Cisco XR 12404 Router Installation Guide
3-19
The software configuration register is set to 0x0102, which causes the router to
boot automatically from the Cisco IOS XR software image stored on the Flash
memory card.
The Flash memory card that shipped with your system is installed in the
•
bottom slot, PCMCIA slot 0 of the RP
Figure 3-12 Flash Memory Card Slots
Chapter 3 Installing the Router
(Figure 3-12).
OL-13830-02