Specifications - Cisco XR 12404 Installation Manual

Appendix A Technical Specifications

Specifications

OL-13830-02
Table A-1 Cisco XR 12404 Router Product Architecture (continued)
Feature Description
Power 110V AC power, sufficient to manage three OC-192c/10GE
Requirements capable line cards and one 10G capable RP.
Total power supplied to the system should not exceed
1200VA
Two AC or DC power supplies in redundant configuration
should be able to support the entire power needs of the
chassis.
Power Supply Redundant and load sharing AC power entry module (PEMs),
Redundancy or
Redundant and load sharing DC PEMs and DC power
distribution units (PDUs)
Route Supports up to 2 RPs per system
Processors The second RP can be used in any slot
The first RP is inserted in slot 0 (1.25 inch height)
Route Supports online insertion and removal, hot swappable
Processor RP redundancy
Redundancy
Switch Fabric The switch fabric supports up to 80 Gbps of capacity
NEBS The Cisco 12404 Inernet Router is designed to comply with
NEBS Level 3 certification
1. A narrow card filler panel must be used to ensure proper air flow through the chassis and
electromagnetic compatibility (EMC)
Table A-2 lists Cisco XR 12404 Router physical specifications.
the environmental specifications.
1
Cisco XR 12404 Router Installation Guide
Product Architecture
Table A-3 lists
A-3