Cisco XR 12404 Installation Manual page 120

Troubleshooting the Processor Subsystem
Table 4-6 Dual PRP-3 Scenario
LED Display
INIT/NV
02A8/HW
OK/RIO
OK/CPU
SENT/RPT
INIT/MEM
TEST/MEM
LNCH/RMON
RDY/RP
or
PWRD
Cisco XR 12404 Router Installation Guide
4-22
Description or Console Message
Displays the LED message during the initialization of the NVRAM infra code.
LED message displayed immediately after the board is powered on.
Displays "1.330GHz dual-core MPC8641D Rev 2.1, 532MHz MPXclk".
Displays "Discovering memory in slot DIMM1 ......................... Found 2GB
DIMM
Discovering memory in slot DIMM2 ......................... Found 2GB DIMM"
Displays "Testing low memory ....................................... OK
Loading main ROMMON image ................................ OK
Verifying loaded image ................................... OK
Load succeeded; launching target ......................... OK"
Displays "Cisco ROMMON System Bootstrap, Version 0.16.0 (bld1)
DEVELOPMENT SOFTWARE
Compiled on 08/27/08 at 15:04:49 PDT [BLD-rommon]
Copyright (c) 1994-2008 by Cisco Systems, Inc.
MPC8641D platform with 4 GB of main memory"
DISPLAYS "Loading disk0:c12k-os-mbi-3.8.0.15I/mbiprp-rp.vm (14809672
bytes)... !!!"
Instead of RDY/RP, sometimes PWRD is displayed in the normal
Tip
booting process.
Chapter 4 Troubleshooting the Installation
OL-13830-02