Connecting Rp And Line Card Cables - Cisco XR 12404 Installation Manual

Chapter 3 Installing the Router

Connecting RP and Line Card Cables

Step 1
Step 2
Figure 3-8 RP and Line Card Cable-Management Brackets
OL-13830-02
Use the following procedure to connect RP and line card cables to the router.
Proceeding from left to right identify the network interface cable that connects to
each card port.
Connect the network interface cables:
Carefully route the identified cable through the cable-management tray and
a.
over to the card interface port; connect one cable at a time
Proceeding from left to right carefully wrap the cables using the velcro straps.
b.
Velcro
strap
Line card
cable management
bracket
Network
interface
cables
Cisco XR 12404 Router Installation Guide

Connecting RP and Line Card Cables

(Figure 3-8).
3-12