Cisco XR 12404 Installation Manual page 118

Troubleshooting the Processor Subsystem
LED Display
RUN/IOX
RP/ACTV
Table 4-5
the chassis is loaded from ROMMON.
Cisco XR 12404 Router Installation Guide
4-20
Description or Console Message
Displays "RP/0/2/CPU0:Sep 10 15:56:29.018: syslogd_helper: [84]:
dsc_event_handler: Got SysMgr dSC
event : 1
RP/0/2/CPU0:Jan 1 00:00:04.809 : mbus-prp3[58]: mbus-prp3:
mbus_platform_init() failed (0x6).
RP/0/2/CPU0:Sep 10 15:56:07.015 : dumper[53]: No HDD Controller found
by process dumper
RP/0/2/CPU0:Sep 10 15:56:21.538 : sysmgr[85]: %OS-SYSMGR-5-NOTICE
: Card is COLD started
RP/0/2/CPU0:Sep 10 15:56:22.622 : dsc[169]: Memory Sanity Check Enabled
RP/0/2/CPU0:Sep 10 15:56:29.007 : dsc[169]:
%PLATFORM-DSC-3-ERR_I_AM_DSC : Setting myself as DSC
RP/0/2/CPU0:Sep 10 15:57:20.071 : sysldr[370]:
%PLATFORM-POWERMGR-3-ROM_ERROR_STATUS :
Unable to get Mbus ROM status from SYSDB. Error ='sysdb' detected the
'warning' condition 'A SysDB client tried to access a nonexistent item or list an
empty directory'
RP/0/2/CPU0:Sep 10 15:57:25.078 : sysldr[370]: %
PLATFORM-SYSLDR-6-INFO : Waiting for startup config to be applied
before booting LCs
Primary Clock is CSC_1 Fabric Clock is Redundant
Bandwidth Mode : Full Bandwidth"
When RP is up and running Cisco IOS XR software.
displays the alphanumeric LED messages and the console output when
Chapter 4 Troubleshooting the Installation
OL-13830-02