Connect The Ac Adapter - Cisco SOHO 77 Hardware Installation Manual

Installing the Router

Connect the AC Adapter

To connect the power supply, follow the steps in
but the process is the same for the Cisco 827, Cisco 827H, SOHO 77, and SOHO 77H routers.)
The device is designed to work with TN power systems.
Warning
Warning This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 16A international) is used on the
phase conductors (all current-carrying conductors).
This equipment is intended to be grounded. Ensure that the host is connected to earth ground during
Warning
normal use.
Figure 2-8
Note Be sure to use the power supply that was shipped with your router. Although you may be able to connect
another Cisco power supply to your router, that power supply may not provide all the features that the
power supply that shipped with your router does.
Cisco 827 and SOHO 77 Routers Hardware Installation Guide
2-14
Connecting the AC Adapter
ET HE RN
TO HU B
ET
CO NS OL
TO PC
E
AD SL
1
4. Connect power
cord to electrical
outlet.
Figure 2-8. (Figure 2-8
1. Press power switch to standby ( ).
M od el C is
co 82 7- 4V
PH ON E
+5 ,+1 2,- 12
,-2 4,- 71 VD
C
4
3
2
1
Desktop power
supply
3. Connect power cord
to power supply.
Chapter 2 Installation
depicts a Cisco 827-4V router,
5. Press power
switch to on ( ).
2. Connect power
supply cable.
78-6854-03