Table of Contents
Advertisement
Quick Links
Cisco 828 Router and SOHO 78 Router Cabling
and Setup Quick Start Guide
This document describes the basic process of cabling and configuring the Cisco 828 router and the
SOHO 78 router. For advanced cabling information, refer to the Cisco 828 Router and SOHO 78 Router
Hardware Installation Guide. For advanced configuration information, refer to the Cisco 828 Router and
SOHO 78 Router Software Configuration Guide. These documents are available on the Cisco Documentation
CD-ROM and on the World Wide Web.
You can access the most current Cisco documentation on the World Wide Web at the following sites:
•
http://www.cisco.com
•
http://www-china.cisco.com
http://www-europe.cisco.com
•
Parts List
The shipment of your Cisco 828 router or SOHO 78 router includes the following items:
One Cisco 828 router or one SOHO 78 router
•
•
One yellow Ethernet cable
One light blue console cable
•
One lavender xDSL cable
•
•
One DB-9-to-RJ-45 adapter
One black desktop power supply
•
•
One black power supply cord
Cisco Documentation CD-ROM
•
Figure 1
your customer service representative.
Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2001. Cisco Systems, Inc. All rights reserved.
shows the items included with the router. If any of the items is missing or damaged, contact
78-12839-01
Advertisement
Table of Contents
Related Manuals for Cisco 828
Summary of Contents for Cisco 828
-
Page 1: Parts List
This document describes the basic process of cabling and configuring the Cisco 828 router and the SOHO 78 router. For advanced cabling information, refer to the Cisco 828 Router and SOHO 78 Router Hardware Installation Guide. For advanced configuration information, refer to the Cisco 828 Router and SOHO 78 Router Software Configuration Guide. - Page 2 (NIC) installed and that Transmission Control Protocol/Internet Protocol (TCP/IP) has been loaded and configured. For more information on how to configure TCP/IP, refer to the Cisco Router Web Setup User Guide, which is available on the Cisco 800 and SOHO Series Product Documentation CD, and refer to information available the Microsoft website.
-
Page 3: Connecting A Hub
PC, or workstation. For information on how the settings of this button on a hub can affect the setting of this router, refer to the Cisco 828 Router and SOHO 78 Router Hardware Installation Guide. You can use the yellow Ethernet cable to connect a server, PC, or workstation to any of the four Ethernet ports. -
Page 4: Connecting A Server, Pc, Or Workstation
PC, or workstation. If you are using Ethernet port 1, 2, or 3, you do not need to use the TO HUB/TO PC button. Note Cisco 828 Router and SOHO 78 Router Cabling and Setup Quick Start Guide 78-12839-01... - Page 5 SE T CO NS OL G. SH DS +5 VD C 1. Connect lavender cable to G.SHDSL port. 2. Connect other end of cable to wall jack. Cisco 828 Router and SOHO 78 Router Cabling and Setup Quick Start Guide 78-12839-01...
-
Page 6: Connecting A Terminal Or Pc
(240 VAC, 16A international) is used on the phase conductors (all current-carrying conductors). This equipment is intended to be grounded. Ensure that the host is connected to earth Warning ground during normal use. Cisco 828 Router and SOHO 78 Router Cabling and Setup Quick Start Guide 78-12839-01... -
Page 7: Set Up The Router To Access The Network
Internet service provider (ISP), it is possible that your router has been configured for use at your site. If you know this is not the case, or if you have purchased Cisco IOS software for the router since installing it, we recommend that you use CRWS to configure the router. -
Page 8: Verifying The Leds
Verifying the LEDs The following table describes the normal LED pattern and what to do if the router displays an abnormal pattern. For more information on all LEDs, see the Cisco 828 Router and SOHO 78 Router Hardware Installation Guide. -
Page 9: System Requirements
About the Product CD System Requirements The following table lists the system requirements for the Cisco 800 and SOHO Series Product Documentation CD. System Part Requirement Processor Pentium 150 MHz or faster recommended PC OS Microsoft Windows 95 Microsoft Windows 98 Microsoft Windows 2000 Microsoft Windows NT 4.0... -
Page 10: Printing Documents
Networkers logo, Packet, RateMUX, ScriptBuilder, ScriptShare, SlideCast, SMARTnet, TransPath, Unity, Voice LAN, Wavelength Router, and WebViewer are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, Discover All That’s Possible, and Empowering the Internet Generation, are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA,...