Cisco SOHO 77 Hardware Installation Manual page 28

Installing the Router
Table 2-3
connections for each device, and the settings of the router TO HUB/TO PC button (the default setting is
IN).
Table 2-3 Ethernet Device Connections for Cisco 827H and SOHO 77H Routers
Network Device
Connected to Router
Hub with equivalent to
router TO HUB/TO PC
button
Hub with equivalent to
router TO HUB/TO PC
button
Hub without equivalent
to router TO HUB/TO
PC button
Server, PC, or
workstation
Hub with equivalent to
router TO HUB/TO PC
button
Hub with equivalent to
router TO HUB/TO PC
button
Hub without equivalent
to router TO HUB/TO
PC button
Server, PC, or
workstation
1. Cisco provides a yellow straight-through cable. You provide crossover or additional straight-through cables. For cable
specifications, see Appendix A, "Specifications and Cables."
2. Hub vendors choose different names for the button that controls the cable selection. This table uses the
Cisco 1528 Micro Hub 10/100 with an MDI/MDI-X button as an example. Determine the button name and setting for your
particular hub. See your hub documentation for details.
Cisco 827 and SOHO 77 Routers Hardware Installation Guide
2-8
lists the Ethernet devices you can connect to Cisco 827H and SOHO 77H routers, the
Ethernet Cable
Router Port Type
ETHERNET port 4 Straight-through
ETHERNET port 4 Straight-through
ETHERNET port 4 Straight-through
ETHERNET port 4 Straight-through
ETHERNET port 1, 2, 3 Crossover
ETHERNET port 1, 2, 3 Straight-through
ETHERNET port 1, 2, 3 Crossover
ETHERNET port 1, 2, 3 Straight-through
Router TO
HUB/TO PC
1
Button Setting
IN
OUT
OUT
OUT
N/A
N/A
N/A
N/A
Chapter 2
Network
Device
Button
2
Setting
MDI (IN)
MDI-X
(OUT)
MDI-X
(OUT)
–
MDI (IN)
MDI-X
(OUT)
MDI-X
(OUT)
–
Installation
78-6854-03