Labels And Icons - Stanley Avdel NeoBolt PB2500N Instruction And Service Manual

• DO NOT operate a tool that is directed towards any person(s).
• DO NOT operate tool with the nose housing removed.
• Keep dirt and foreign matter out of the air vents of the tool as this will cause the tool to malfunction.

1.2 LABELS AND ICONS

MARKINGS ON TOOL
SERIAL NUMBER POSITION: The Serial Number is located on the foot of the tool (Fig m). This serial number
can only be viewed once the battery (g) is removed from the tool.
DATE CODE POSITION: The date code (n), which also includes year of manufacture is printed into the serial
number label: MM2020xxx
LABELS ON TOOL, CHARGER AND BATTERY PACK
In addition to the pictographs used in this manual, the labels on the tool, charger and the battery pack may
show the following pictographs.
Read all documentation
Read all documentation
Wear eye protection
Wear respiratory protection
Wear hearing protection
Battery charging.
Battery charged.
Hot/cold pack delay.
Problem pack or charger.
Problem power line
Do not probe with conductive objects
Visible radiation. Do not stare into
light.
Do not charge damaged battery packs
Do not expose to water.
Have defective cords replaced immediately
Charge only between 4 °C and 40 °C.
Discard the battery pack with due care
for the enviroment.
Do not incinerate the battery pack.
Charges Li-Ion battery packs.
See technical Data for charging time.
Only for indoor use.
Shock hazard symbol
Charge DEWALT battery packs only with
designated DEWALT chargers. Charging
battery packs other than the designated
DEWALT batteries with a DEWALT
charger may make them burst or lead to
other dangerous situations.
E N G L I S H
5