Unpacking/Packing Tools - Cisco Gigabit Switch Router 12008 Installation And Configuration Manual

Unpacking/Packing Tools

Unpacking/Packing Tools
For visual guidance in unpacking or repacking the Cisco 12008, refer to Figure A-1.
Caution
on the power supplies. These handles are not designed to support the weight of the router
You need the items in Table A-1 to unpack or pack the Cisco 12008.
Table A-1
Tool
1/4-inch flat-blade
screwdriver
Wire cutters
ESD-preventive wrist strap
Antistatic mat or bag
Packing straps or carton
sealing tape
A-4
Cisco 12008 Gigabit Switch Router Installation and Configuration Guide
To prevent damage, never attempt to lift or tilt the Cisco 12008 using the handles
Cisco 12008 System Packaging Tools
Unpacking
X
X
X
X
Packing Purpose
X To remove the anchors from the
Cisco 12008 side panels
To cut the packing straps
X To prevent ESD damage
X To protect boards
X To seal box for shipping