Cisco Gigabit Switch Router 12008 Installation And Configuration Manual page 191

Table 4-2 Typical Contents of the Line Card Alphanumeric LEDs
Line Card LED
Display Meaning
MROM The MBus microcode begins to execute; nnnn is the
nnnn microcode version number. For example, microcode
version 1.17 would display as 0117.
might not be visible, since it occurs briefly.
LMEM Low memory on the line card is being tested.
TEST
MEM The size of main memory on the line card is being
INIT discovered.
ROMI The ROM image is being loaded into line card
GET memory.
FABL The line card is waiting for the loading of the fabric
WAIT downloader.
FABL The fabric downloader is being loaded into line card
DNLD memory.
FABL The fabric downloader is being launched.
STRT
FABL The fabric downloader has been launched and is
RUN running.
IOS The Cisco IOS software is being downloaded into
DNLD line card memory.
IOS The Cisco IOS software is being launched.
STRT
IOS The Cisco IOS software is running.
UP
IOS The line card is enabled and ready for use.
RUN
1. The version of MBus microcode running on your system might be different.
2. The fabric downloader loads the Cisco IOS software image onto the line card.
Observing System Startup and Performing a Basic Configuration 4-7
Starting the System and Observing Initial Conditions
1
2
Source
MBus controller
This display
LC rommon
LC rommon
RP IOS
RP IOS
RP IOS
RP IOS
RP IOS
RP IOS
RP IOS
RP IOS
RP IOS