Step 2: Up And Running - Juniper Day One+ JSA7800 Manual

Power button
Reset button
LEDs
Power
GLAN2
Alert/Power fail
5. Familiarize yourself with the LEDs:
LED
Power
Hard drive
LAN
Information
Alert/Power Fail

Step 2: Up and Running

IN THIS SECTION
Plug and Play | 9
Connect the Management Device | 9
Configure the JSA7800 | 10
Verify the Settings | 16
HDD
GLAN1
Information
State
Solid green— Indicates that the appliance is receiving power.
Unused
LAN1— Indicates eno1 interface activity when blinking.
LAN2— Indicates eno2 interface activity when blinking.
Red (blinking)— Indicates a fan failure.
Solid red— Indicates an overheat condition. Make sure there aren't any cables obstructing
the system airflow and that the ambient room temperature isn't too warm.
Red (slowly blinking)— Indicates a power failure.
Solid blue —Indicates UID function is activated.
Solid red— Indicates a power supply failure.
Amber— Indicates that the appliance is operating normally.
8