Juniper Day One+ JSA7800 Manual page 10

Configure the JSA7800
When using a laptop or PC to connect to the appliance, you'll need to use a terminal program, such as HyperTerminal to
connect to the appliance.
Have this information handy before you begin to configure the JSA7800:
Hostname
IP address
Network Mask
Default gateway IP address
Primary domain name server (DNS)
E-mail server name
(Optional) Secondary DNS and public IP address
1. Open a terminal program, such as HyperTerminal, on the PC to access the JSA800 management console.
2. At the console prompt, log in as root (default username). You don't need a password when you log in for the first time.
NOTE: The username is case sensitive.
3. Press Enter. The End User License Agreement (EULA) displays.
4. Read the agreement and if you agree, type YES and press Enter. The Appliance ID selection window displays.
10