Juniper Day One+ JSA7800 Manual page 7

7
9. Press the locking tabs on both sides simultaneously, and slide the chassis into the rear of the rack.
10. Secure the chassis handles to the four-post rack with the mounting screws.
2
Power On
Now you're ready to connect the JSA7800 to a dedicated AC power source. The switch comes with the AC power cord
for your geographic location.
Here's how to connect the JSA7800 to AC power:
1. Before connecting the appliance to the power supply, attach an ESD strap to an ESD point and place the other end of
the strap around your bare wrist.
2. Plug each AC power cord into the power sockets on the rear panel.
3. Plug the other end of each power cord into a wall socket.
4. Press the Power button on the front panel.