Juniper Day One+ JSA7800 Manual page 4

Callout
1
2
3
4
5
3. Install the inner rail extensions.
a. Pull the inner rail out of the outer rail until it is fully extended as illustrated. Press the locking tab down to release
the inner rail.
b. Place the inner rails against the sides of the chassis, aligning the chassis hooks with the holes in the inner rails.
c. Slide the inner rail toward the front of the chassis until the inner rail clicks into the locked position.
d. Secure the inner rails to the chassis with the screws provided.
Component
Inner rail
Locking tab
Middle rail
Outer rail
Locking tab
4