Concluding Steps - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

System board and components

15.3.1.3 Concluding steps

"Installing the air duct" on page 62
Ê
"Reassembling" on page 55
Ê
"Connecting the power cord" on page 59
Ê
"Switching on the server" on page 60
Ê
"Resuming BitLocker functionality" on page 89
Ê
Ê Enable TPM in the system board BIOS. Proceed as follows:
Ê Switch on or restart your server.
Ê As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
Ê Select the Advanced menu.
Ê Select the Trusted Computing submenu.
Ê Set the TPM Support and TPM State settings to Enabled.
Ê Under Pending TPM operation, select the desired TPM operation mode.
Ê Save your changes and exit the BIOS.
I
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
354 Upgrade and Maintenance Manual
RX2520 M4